Engineering Specifications

E-MON D-MON Three Phase KWH Meters

• Meter shall be fully electronic with digital LCD display for kilowatt hour readings. Meter shall provide rate of consumption indication and also a segment test button to ensure integrity of the display (KWH Meter only).

• Meter shall provide a load indicator to indicate real time power consumption levels for field testing and certification.

• Meter shall be enclosed in a heavy duty JIC steel enclosure suitable for indoor installation. Meter enclosure shall provide method of locking to prevent unauthorized access.

• Meter shall be UL Listed, CSA Approved and certified by a nationally recognized independent test facility to ANSI C12.1 and C12.16 specifications with split-core current sensors.

• Meter shall be optionally available with a Demand (KW) reading. Demand reading will show the highest peak demand and date and time peak occurred over a time period consistent with the local utility.

• Meter shall be provided with a self contained backup system to maintain memory and display during power failures.

• Meter shall use 0-2 V voltage output current sensors to allow paralleling and/or mounting up to 2,000 feet from the meter. Sensors shall be of split core configuration to allow installation without powering down. Sensors shall be available from 25 amps to 3200 amps (Meter tested to ANSI C12.1 and C12.16 with current sensors.) Sensors shall be optionall available in solid-core configuration.

• Meter shall be provided with a modular connector (s) to provide interfacing for:
  • AMR (Automatic Meter Reading)
  • Pulse modules
  • Analog signal modules
  • Energy control modules
  • Instantaneous demand displays

• Meter shall be available in MMU (Multiple Meter Unit) configurations of up to 25 meters.

• Meter shall be compatible with I-MON/CE-MON Automatic Meter Reading system and software.

Relative Links

• Complete Specification Sheet (Downloadable PDF)
• GeneralSpecifications
• Installation Diagrams
• Technical Specifications